Kennametal

1225 Drift
		Product Details

C-10
		Product Details
		Has a narrower face than C-10H style. Accepts all C-10 bits. Welds same as C-10H block.

C-10H
		Product Details
		Heavy duty design (has machined step for non-rotating tools). Accepts all C-10 bits. Easily welded with a 7018 or 8018 low-hydrogen rod.

C-20
		Product Details
		Accepts C21, C21HD, C22, C23 and C24 bits. Easily welded with a 7018 or 8018 low-hydrogen rod. Will not accept rear retainer style tools.

C-20HD
		Product Details
		Extra-heavy-duty design. For tough applications requiring long block life. Accepts C21, C21HD, C22, C23 and C24 bits. Welds same as C20 block. Block must be raised to allow clearance at rear to use with external retainer style tools.

C-21
		Product Details
		For most cutting applications. Especially good in soft to medium-hard material. Carbide tip (7.93mm diameter) provides fast penetration.

C-21HD
		Product Details
		Heavy duty design. For trenching, augering, and sawing in extremely hard rock and concrete. Carbide tip (12.7mm diameter) provides long tooth life.

C-30
		Product Details
		Accepts our C-31, C-31HD, C-32 and C-33 bits. Welds same as C-30H block.

C-30H
		Product Details
		Heavy duty design. Accepts all C-30 bits. Easily welded with a 7018 or 8018 low-hydrogen rod.

C-31
		Product Details
		For trenching, sawing, augering, and tunnel boring in soft to hard rock and concrete. Carbide tip (9.5mm diameter) and steel nose design provide strength and long tool life.

C-31HD
		Product Details
		Heavy duty design for trenching, sawing, augering, and tunnel boring in extremely hard rock concrete. Carbide tip (12.7mm diameter) provides long tool life.

C-3LR 94
		Product Details
		Rock Ripper tooth for cutting concrete and other tough cutting applications.

C123 Puller
		Product Details

C31 HD Puller
		Product Details

CMM-4
		Product Details
		Basic system bit. Double angle carbide tip prolongs tool life. Requires a CMM-4 snap ring retainer (included with bit).

CMMB-2
		Product Details
		Accepts our CMM-4 and CMM-4-THD bits. Easily welded with a 7018 or 8018 low-hydrogen rod.

Recently Viewed Products

• Welding Bars, Pin & Plate Version (Category:  Betek)
• Round Shank Cutter Bit & Holders (Category:  Betek)
• Quick Change System For Casing Shoe (Category:  Betek)
• Pilot Bits (Category:  Betek)
• Phazer 40 (Category:  Betek)
• Flat Tools (Category:  Betek)